Skip to content 
Quality Steels wholesaler for Global
WanWei specializes in special steel materials. We are your trusted partner for all your steel needs.
Wires
Diameter:
Coil weight:
Round Bars
Diameter:0.25mm-330.0mm
Length: 10 meters maxmium
Flats
Thickness:
Width:
Length:
Squares
Edge length：
Length：
Sheets
Thickness:
Width:
Length:
Tubes
ID:
OD:
Wall thickness:
Length:
| WanWei Main Product List | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel Series | ASTM | GB | JIS | DIN | C | P | S | Mn | Si | Cr | Ni | Mo | other |
Stainless Steel | 201 | 1Cr17Mn6Ni5N | SUS201 | 1.4372 | ≤0.15 | ≤0.060 | ≤0.030 | 5.5～7.50 | ≤0.75 | 16.0～18.0 | 3.5~5.5 | N≤0.25 | |
| 202 | 1Cr18Mn8Ni5N | SUS202 | 1.4373 | ≤0.15 | ≤0.060 | ≤0.03 | ≤7.5~10.0 | ≤1.0 | 17.0~ 19.0 | 4.00~ 6.00 | N≤0.25 | ||
| 209 | 1Cr18Ni9 | / | 1.4455 | ≤0.06 | ≤0.045 | ≤0.035 | 4.0~6.0 | ≤1.00 | 20.5~23.5 | 3.5~5.5 | 1.5~3.0 | Nb:0.1~0.3, V:0.1~0.3 N:0.2~0.4 | |
| 303 | Y1Cr18Ni9 | SUS303 | 1.4305 | ≤0.15 | ≤0.20 | ≥0.15 | ≤2.00 | ≤1.00 | 17.00~19.00 | 8.00~10.00 | ≤0.6 | ||
| 304 | 06Cr19Ni10 | SUS304 | 1.4301 | ≤0.07 | ≤0.045 | ≤0.030 | ≤2.00 | ≤0.75 | 17.5–19.5 | 8.0–10.5 | N≤0.10 | ||
| 304L | 022Cr19Ni10 | SUS304L | 1.4306 | ≤0.03 | ≤0.03 | ≤2.0 | ≤1.0 | 18.0～20.0 | 8.0～12.0 | ||||
| 316L | 022Cr17Ni12Mo2 | SUS316L | 1.4404.5 | ≤0.03 | ≤0.045 | ≤0.030 | ≤2.00 | ≤1.00 | 16.0~18.0 | 10.0~14.0 | 2.0~3.0 | ||
| 317 | 06Cr19Ni13Mo3 | SUS317 | / | ≤0.08 | ≤0.045 | ≤0.03 | ≤2.00 | ≤1.00 | 18.0~20.0 | 11.0~15.0 | 3.0~4.0 | N≤0.10 | |
| 317L | 022Cr19Ni13Mo3 | SUS317L | 1.4438 | ≤0.030 | ≤0.045 | ≤0.030 | ≤2.00 | ≤1.00 | 18.0～20.0 | 11.0～15.0 | 3.0～4.0 | ||
| 410 | 1Cr13 | SUS410 | 1.4006 | 0.15 | 0.04 | 0.03 | 1.00 | 1.00 | 11.5~13.5 | ||||
| 410L | S11213 | SUS410L | 1.4003 | ≤0.030 | ≤0.035 | ≤0.030 | ≤1.00 | ≤1.00 | 11.00～13.00 | N≤0.60 | |||
| 416 | Y1Cr13 | SUS416 | 1.4005 | ≤0.15 | ≤0.060 | ≥0.15 | ≤1.25 | ≤1.00 | 12.0~14.0 | ≤0.60 | ≤0.60 | ||
| 430 | 1Cr17 | SUS430 | X6Cr17 | ≤0.12 | ≤0.12 | ≤0.030 | ≤1.00 | ≤0.75 | 16.00~18.00 | ≤0.60 | |||
| 440B | 68Cr17 | SUS440B | 1.4112 | 0.60~0.75 | ≤0.04 | ≤0.030 | ≤1.00 | ≤1.00 | 16.0~18.0 | ≤0.60 | ≤0.75 | V:0.07~0.12 | |
| 440C | 9Cr18Mo | SUS440C | 1.4125 | 0.95~1.20 | ≤0.04 | ≤0.030 | ≤1.00 | ≤1.00 | 16.0~18.0 | ≤0.60 | ≤0.75 | ||
| 15-5PH | 05Cr15Ni5Cu4Nb | / | 1.4545.5 | ≤0.07 | ≤0.04 | ≤0.03 | ≤1.00 | ≤1.00 | 14.0~15.5 | 3.5~5.5 | Cu:2.5~4.5 Nb+Ta:0.15~0.45 | ||
| 17-4PH | 0Cr17Ni4Cu4Nb | SUS630 | 1.4542 | ≤0.07 | ≤0.040 | ≤0.030 | ≤1.00 | ≤1.00 | 15.00~17.50 | 3.00~5.00 | Cu:3.00~5.0 Nb:0.15~0.45 | ||
| 13-8PH XM-13 | 0Cr13Ni8Mo2Al | / | / | ≤0.05 | ≤0.01 | ≤0.008 | ≤1.00 | ≤1.00 | 12.25~13.25 | 7.5~8.5 | 2.0~2.5 | Al:0.90~1.35 N≤0.01 | |
| N50 XM-19 | S20910 | / | / | 0.06 | 0.05 | 0.03 | 4.0~6.0 | 1.00 | 20.5~23.5 | 11.5~13.5 | 1.5~3.0 | Nb:0.1~0.3 V:0.1~0.3 N:0.2~0.4 | |
| N60 | 0Cr17Ni9Mn8Si4N | / | / | 0.07~0.08 | ≤0.040 | ≤0.030 | 7.50~8.50 | 3.70~4.20 | 16.00～17.00 | 8.00～8.50 | ≤0.75 | V：≤0.20 Al：≤0.020 B: ≤0.0015 Sn: ≤0.05 W：0.15 Nb:≤0.1 N:0.10~0.80 Ti:≤0.050 Fe:Bal | |
| 1.4913 | 2Cr12MoVNbN | / | 1.4913 | ≤0.20 | ≤0.040 | ≤0.030 | ≤1.0 | ≤1.5 | 18.5~21.0 | ≤1.0 | 3.0~3.5 | V:0.2~0.3 Nb: 0.15~0.30 N≤0.10 | |
| UNS S31803 | 022Cr19Ni5Mo3Si2N | SUS329J3 | 1.4462 | 0.03 | 0.03 | 0.02 | 2.00 | 1.00 | 21.00~23.00 | 4.50~6.50 | 2.50~3.50 | N:0.08~0.20 | |
| 1.4923 | / | / | X22CrMoV 12-1 | ≤0.035 | ≤0.035 | 0.30~0.80 | 11.0~12.5 | 0.30~0.80 | 0.80~1.20 | V：0.25~0.35 | |||
| 9Cr | / | / | / | ≤0.15 | ≤0.02 | ≤0.01 | 0.3~0.6 | ≤1 | 8~10 | ≤0.4 | 0.9~0.1 | Cu:≤0.25 | |
| Super 13Cr | / | / | / | ≤0.03 | 0.50 | 0.50 | 11.5~13.5 | 4.5~6.5 | 1.5~3.0 | V：≤0.50 Ti:0.01~0.50 | |||
| 420B | 30Cr13 | SUS420J2 | 1.4028 | 0.10~0.15 | ≤0.035 | ≤0.030 | 0.50~0.80 | 0.15~0.30 | 16.00~18.00 | 2.00~3.00 | V：0.15~0.30 | ||
| 440A，F51/2205，F55 / UNS S32760，UNS S32760 (1.4501) （Including but not limited to the above grades) | |||||||||||||
| Alloy steel | Inconel A286 | GH2132 | / | 1.4980 | ≤0.08 | ≤0.03 | ≤0.02 | 1.0~2.0 | ≤1.00 | 13.5~16.0 | 24.0~27.0 | 1.0~1.5 | Ti:1.90~2.85 Fe:Bal |
| Inconel 600 | GH3600 | / | / | ≤0.15 | ≤0.015 | ≤1.0 | ≤0.50 | 14.0~17.0 | ≥72 | Cu:≤0.50 Fe:6.0~10.0 | |||
| Inconel 601 | GH3602 | / | / | ≤0.1 | ≤0.02 | ≤0.015 | ≤1.5 | x≤0.5 | 21~25 | 58~63 | Cu:≤1 Al:1.0~1.7 Fe:Bal | ||
| Inconel 617 | GH3044 | / | NiCr23Co12Mo | 0.05~0.10 | ≤0.012 | ≤ 0.008 | ≤ 0.70 | ≤ 0.70 | 20.0~23.0 | Bal | 8.0~10.0 | Al：0.60~1.50 Co：10.0~13.0 Ti:0.20~0.60 Fe:≤ 2.00 | |
| Inconel 625 | GH3625 | / | 2.4856 | ≤0.10 | ≤0.02 | ≤0.02 | ≤0.50 | ≤0.50 | 20.0~23.0 | Bal | 8.0~10.0 | Co:≤1.0 Nb:≤3.15~4.15 Ti≤0.40 Fe≤5.0 | |
| Inconel 718 | GH4169 | / | / | ≤0.08 | ≤0.02 | ≤0.02 | ≤0.35 | ≤0.50 | 17.0~21.0 | 50.0~55.0 | 2.8~3.3 | Co:≤1.0 Nb:≤4.75~5.5 Ti:0.65~1.15 Fe:Bal | |
| Inconel 800 | NS1101 | / | / | ≤0.10 | ≤0.02 | ≤0.02 | ≤0.50 | ≤0.01 | 19.0~23.0 | 30.0~35.0 | Cu:≤0.75 Ti:0.15~0.60 Fe:Bal | ||
| Alloy X750 | GH4145 | NCF750 | NiCr15Fe7TiAl | ≤0.08 | ≤0.015 | ≤0.010 | ≤1.0 | ≤0.50 | 14.0～17.0 | Ni+Co:≥70.0 Al:0.40～1.00 Nb+Ta:0.70～1.20 Co:≤1.0 Cu:≤0.50 Ti:2.25～2.75 Fe:5.00～9.00 | |||
| L-605 | GH605 | / | / | 0.05~0.15 | ≤0.04 | ≤0.030 | 1.0~2.0 | ≤0.4 | 19.0~21.0 | 9.0~11.0 | W：14.0~16.0 Co:Bal Fe:≤3.0 | ||
| C276 | NS3304 | / | / | ≤0.02 | ≤0.040 | ≤0.03 | ≤1.00 | ≤0.08 | 14.5~16.5 | Bal | 15.00~17.0 | W：3.0~4.5 V:≤0.35 Fe:4.0~7.0 | |
| Monel 400 | Mcu-28-1.5-1.8 | / | 2.4360 | ≤0.3 | ≤0.024 | ≤2.0 | ≤0.5 | ≥63 | Cu:28~34 Fe:≤2.5 | ||||
| Monel R-405 | / | / | / | ≤0.3 | 0.025~0.06 | ≤2.0 | ≤0.5 | ≥63 | Cu:28~34 Fe≤2.5 | ||||
| Nimonic75 | GH3030 | / | 2.463 | ≤0.12 | ≤0.03 | ≤0.02 | ≤0.7 | ≤0.8 | 19~22 | Bal | Cu:≤0.2 Al:≤0.15 Ti:0.15~0.35 Fe:≤1.5 | ||
| Monel K-500 | / | / | 2.4375 | ≤0.25 | ≤0.010 | ≤1.50 | ≤0.50 | 63.0~70.0 | Cu：27.0~33.0 Al：2.30~3.15 Ti:0.35~0.85 Fe:≤2.00 | ||||
| 660B | GH2132 | SUH660 | 1.498 | ≤0.08 | ≤0.040 | ≤0.030 | ≤1.00 | ≤1.00 | 19.00~22.00 | 24.00~27.00 | 1.00~1.50 | Al:0.35~0.75 V:≤0.10 B:0.001~0.01 Ti:1.00~1.50 | |
| HK30 | / | / | / | ≦0.25~0.35 | ≦0.04 | ≦0.04 | ≦1.50 | ≦1.75 | 23~27 | 19.0~22.0 | |||
| GH4145 | / | / | ≤0.08 | ≤0.0150 | ≤0.010 | ≤1.00 | ≤0.50 | 14.0~17.0 | Al:0.40~1.00 Ni+Co:≥70.0 Nb+Ta:0.70～1.20 Co:≤1.00 Cu:≤0.50 Ti:2.25~2.75 Fe:5.0~9.0 | ||||
| 4140 | / | / | / | 0.38～0.43 | ≤0.030 | ≤0.040 | 0.75～1.00 | 0.15～0.35 | 0.80～1.10 | ≤0.030 | 0.15～0.25 | Cu：≤0.030 | |
| 4340M | / | / | / | 0.38~0.43 | ≤0.01 | ≤0.01 | 0.7~0.9 | 1.45~1.80 | 0.70~0.95 | 1.65~2.00 | 0.15~0.25 | Cu:≤0.35 V:0.30~0.50 | |
| 4340 | 40CrNi2MoA | / | / | ≤0.035 | ≤0.40 | 0.60~0.80 | 0.15~0.35 | 0.70~0.90 | 1.65~2.00 | 0.20~0.30 | |||
| AISI 52100 | GCr15 | / | 100Cr6 | 0.93 ~ 1.05 | ≤0,025 | ≤0.015 | 0,25 ~ 0,45 | 0,15 ~ 0,35 | 1,40 ~ 1,65 | Cu:≤0.30 Al：≤0.05 O：≤0.0015 | |||
| MP35N | 3YC58 | / | W.Nr. 2.4999 | ≤0.03 | ≤0.015 | ≤0.010 | ≤0.15 | ≤0.15 | 19~21 | 33~37 | 9~10.50 | Co:≥35 B:0.01 Ti:≤1.0 Fe:≤1.0 | |
| Hastelloy X | N06002 | / | NiCr22FeMo | 0.05~0.15 | ≤0.015 | ≤0.01 | ≤1.0 | ≤1.0 | 20.5~23.5 | Bal | 8.0~10.0 | Co：0.5~2.5 Al:≤0.1 W：0.2~1.0 B：≤0.005 Fe:17.0~20.0 | |
| M50 | S8Cr4Mo4V | / | / | 0.78～0.88 | ≤0.030 | ≤0.030 | 0.15～0.45 | 0.20～0.60 | 3.75～4.50 | 3.90～4.75 | V:0.80～1.25 | ||
| Nimonic80A | GH80A | / | 2.4952 | ≤0.10 | ≤0.015 | ≤1.0 | 18.0~21.0 | Bal | Co≤0.20 Al:1.0~1.8 B≤0.0080 Ti:1.8~2.7 | ||||
| N32, Alloy 465，ERNiFeCr~1，ERNiCrMo~3， （Including but not limited to the above grades） | |||||||||||||
| High Speed Steel | W3 | / | / | / | 0.80~0.85 | ≤0.03 | ≤0.03 | 0.30~0.50 | 0.80~1.00 | 3.80~4.20 | 1.40~1.60 | V:0.75~0.85 W:2.55~2.65 | |
| W4 | W6Mo5Cr4V2 | / | / | 0.91~0.92 | ≤0.03 | ≤0.03 | 0.30~0.50 | 0.80~1.00 | 3.90~4.10 | 2.55~2.65 | V:0.65~0.7 W:3.55~3.65 | ||
| W5 | W6Mo5Cr4V2 | / | / | 0.85~0.90 | ≤0.03 | ≤0.03 | 0.15~0.40 | 0.20~0.45 | 3.90~4.10 | 1.55~1.65 | V:0.60~0.70 W:4.55~4.60 | ||
| M2 | W6Mo5Cr4V2 | 1.3343 | 1.3343 | 0.85~0.89 | ≤0.03 | ≤0.03 | 0.15~0.40 | 0.20~0.40 | 3.82~3.96 | 4.52~4.62 | V:1.76~1.85 W:5.52~5.62 | ||
| M35 | W6Mo5Cr4V2Co5 | SKH55 | 1.3243 | 0.88～0.95 | ≤0.030 | ≤0.030 | ≤0.40 | ≤0.40 | 3.80～4.50 | 4.75～5.20 | V :1.75～2.00 W :6.00～7.00 Co: 4.60～5.00 | ||
| M42 | W2Mo9Cr4VCo8 | SKH59 | 1.3247 | 1.00~1.15 | ≤0.030 | ≤0.030 | ≤0.65 | ≤0.65 | 3.50~4.50 | 9.0~10.0 | V：0.95~1.35 W：1.15~1.85 Co:7.50~8.50 | ||
| T1 | T10900 | C1100 | / | 0.65~0.80 | ≤0.035 | ≤0.035 | 0.10~0.40 | 0.20~0.40 | 3.75~4.50 | W:17.25~18.75 V:0.90~1.30 | |||
| （Including but not limited to the above grades） | |||||||||||||
Tool & Die Steel | D2 | Cr12Mo1v1 | SKD11 | 1.2379 | 1.40~1.60 | ≤0.035 | ≤0.030 | ≤0.06 | ≤0.06 | 11.0~13.0 | ≤0.05 | 0.7~1.2 | CO:≤1.00, V:0.50~1.10, |
| H13 | 4Cr5MoSiV1 | SKD61 | 1.2344 | 0.32~0.45 | ≤0.030 | ≤0.030 | 0.20~0.50 | 0.80~1.20 | 4.75~5.50 | 1.10~1.75 | V：0.80~1.20 | ||
| 1.2367 | 4Cr5MoSiV | / | 1.2367 | 0.35～0.40 | ≤0.035 | ≤0.010 | 0.30～0.60 | 0.30～0.50 | 4.70～5.20 | 2.70～3.30 | V:0.40～0.70 | ||
| Cr8, Cr12, Cr12MoV （Including but not limited to the above grades） | |||||||||||||
Get a Quick Quote?
Efficient and hassle-free. Request your quote now and see how our quality steel products can meet your needs.
application
Oil and Gas Industry
Pipelines, drill pipes, Valves and Fittings, welding wires
Nuclear Power and Military Industry
Structural Components
Aerospace industry
Structural Components, Engine Parts, Landing Gear, Fasteners and Fittings
Cutting Tools and Parts
Hand saws, Drill, Taps, Broach, Hob, Punch rod, Shredder blade, Wood-working knife, OEM cutting tools and parts.
Production Process
Our production process guarantees superior steel products, with rigorous quality control at every phase. From raw materials to final products, we emphasize precision and excellence. Additionally, we adjust and customize production techniques to meet various customer quality requirements.
Smelting
ESR
Forging
Hot-rolling
Cold-drawing
Heat-treatment
Machining
Inspection
Packing
Customized Excellence for Your Project Needs
– Tailored solutions for your project goals and market demands.
– Advanced manufacturing capabilities for complex and small batch productions.
– Rigorous quality checks to ensure compliance with international standards.
shipments
Multiple, professional transport methods tailored to meet the unique needs of your business.
By Sea
All customs documentation will be handled by us, ensuring smooth clearance at every port.
By Air
For urgent and high-value shipments. Goods with small volume and light weight
By Rail
Combining speed and cost-efficiency.
By Courier
For samples and small volume goods.
Stay in touch
Stay connected with us to ensure your needs are always met. Whether you have questions, need support, or want to discuss your project, we’re here to help. Contact us anytime for prompt and reliable assistance.
